Quick Start

Creating a new project

kdenlive_folder_structure

Kdenlive directory structure

The first step is creating a new (empty) folder for our new project. We will call it quickstart-tutorial/ in this tutorial. Then get some sample video clips, or download them from here Kdenlive-tutorial-videos-2011-avi.zip (7 MB) [1] and extract them to e.g. a quickstart-tutorial/Videos/ subfolder inside the project folder.

The image on the left shows the suggested directory structure: Each project has its own directory, with video files in the Videos subdirectory, audio files in the Audio directory, etc. (see also chapter Folder Structure)

Note

The tutorial from now on assumes that you use the sample videos provided, but it works with any.

kdenlive21.04_new_project_window

New Project dialog

Open Kdenlive and create a new project File ‣ New.

Choose the previously created project folder (quickstart-tutorial/) and select an appropriate project profile. The video files provided above are 720p, 23.97 fps. [2] If you are using your own files and don’t know which one to use, Kdenlive will suggest an appropriate one when the first clip is added [3] , so you can leave the field on whatever it is.

If you like you can change to the dark theme: Settings ‣ Colour Theme ‣ Breeze-Dark.

Adding clips

kdenlive2304_add_clips

Project Bin: Adding video clips

Now that the project is ready, let’s start adding some clips (i.e. the ones you downloaded). This is done via the Project Bin widget; a click on the Add Clip or Folder icon kdenlive-add-clip directly opens the file dialog, a click on the small arrow shows a list of additional clip types that can be added as well. Video clips, audio clips, images, and other Kdenlive projects can be added via the default Add Clip or Folder dialog.

kdenlive_main_window

Kdenlive window with the tutorial files

After loading the clips, Kdenlive will look similar to this. On the top left there is the already known Project Bin. To the right of it are the monitors that show video: The clip monitor displays video from the original clips, the project monitor shows how the output video will look with all effects, transitions, etc. applied. The third, also very important, item is the timeline (below the monitors): This is the place where the video clips will be edited. There are two different types of tracks: Video and audio. Video tracks can contain any kind of clip, audio tracks as well but when dropping a video file to the audio track, only the audio will be used.

kdenlive_save_project

Saving a Kdenlive project

Let’s save the work via File ‣ Save. This saves our project, i.e. where we placed the clips on the timeline, which effects we applied, and so on. It can not be played. [4] The process of creating the final video is called Rendering.

Timeline

Note

In this Quick Start section we will not go into the details of the timeline and its components. More detailed information is available in the Timeline section of this documentation.

Now comes the actual editing. Project clips are combined to the final result on the timeline. They get there by drag and drop [5] : Drag some Napoli (assuming you are using the files provided above, as in the rest of this quick start tutorial; if not, please make sure your screen is waterproof, and perhaps tomatoproof) from the project bin and drop it onto the first track in the timeline. In this case track V2.

kdenlive_timeline_clips

First clips in the timeline

Since some cutlery is needed as well, grab the spoon clip and drop it on the first track as well (track V2). Then drag the Napoli to the beginning of the timeline (otherwise the rendered video would start with some seconds of plain black), and the Spoon right after the Napoli, such that it looks like in the image on the left. (Where I have zoomed in with Ctrl+Wheel.)

kdenlive_timeline_cursor

Timeline cursor

The result can already be previewed by pressing Space (or the Play button in the project monitor). You will see the Napoli directly followed by a Spoon. If the timeline cursor is not at the beginning, the project monitor will start playing somewhere in the middle; you can move it by dragging it either on the timeline ruler or in the project monitor. If you prefer keyboard shortcuts, Ctrl+Home does the same for the monitor that is activated. (Select the Project Monitor if it is not selected yet before using the shortcut.)

kdenlive_resize_marker

Resize marker

Since after eating comes playing, there is a Billiards clip. Add it to the timeline as well (track V1). For the first 1.5 seconds nothing happens in the clip, so it should perhaps be cut to avoid the video becoming boring. An easy way [6] for this is to move the timeline cursor to the desired position (i.e. the position where you want to cut the video), then drag the left border of the clip when the resize marker appears. It will snap in at the timeline cursor when you move close enough.

kdenlive_overlap_clips

Overlapping clips

To add a transition between eating (the Spoon) and playing billiards, the two clips need to overlap. To be precise: place the second clip above or below the first one. The first clip should end some frames after the second one begins. Zooming in until the ticks for single frames appear helps here; it also makes it easy to always have the same transition duration, five frames in this case.

You can zoom in by either using the zoom slider at the bottom right corner of the Kdenlive window, or with Ctrl+Mousewheel. Kdenlive will zoom to the timeline cursor, so first set it to the position which you want to see enlarged, then zoom in.

kdenlive_add_transition

Transition marker

Now that the clips overlap, the transition can be added. This is done either by right-clicking on the upper clip and choosing Insert a Composition and choose Wipe or, easier, by hovering the mouse over the lower right corner of the Spoon clip until the pointing-finger pointer is shown and the message “Click to add composition” appears. The latter, by default, adds a wipe transition, which is in this case the best idea anyway since the Spoon is not required for playing.

The wipe transitions fades the first clip into the second one. See also Wipe.

kdenlive_add_last_clip

Let’s now add the last clip, the Piano, and again apply a wipe transition. When adding it on the first track of the timeline (track V2), you need to click on the new clip’s lower left edge to add the transition to the previous clip.

Effects

kdenlive_add_effect

Effect List

The Piano can be colourized by adding an effect to it. Click on the effect view (if effect view is not visible enable the view: View ‣ Effects). Type rgb in the search field then double-click the RGB Adjustment effect.

kdenlive_effect_flag

Once the effect has been added, click on an empty part in the timeline and you see its name on the timeline clip. It will also be shown in the Effect/Composition Stack widget.

kdenlive_effect_stack

Effect Stack with RGB adjustment

To get a warm yellow-orange tone on the image, fitting the comfortable evening, blue needs to be reduced and red and green improved.

The values in the Effect/Composition Stack widget can be changed by using the slider (middle mouse button resets it to the default value), or by entering a value directly by double-clicking the number to the right of the slider.

The Effect/Composition Stack widget always refers to the timeline clip that is currently selected. Each effect can be temporarily disabled by clicking the eye icon, or all effects for that clip can be disabled using the check box at the top of the Effect/Composition Stack widget (the settings are saved though). This is e.g. useful for effects that require a lot of computing power, so they can be disabled when editing and enabled again for rendering.

For some effects like the one used there it is possible to add keyframes. The framed watch icon indicates this. Keyframes are used for changing effect parameters over time. In our clip this allows us to fade the piano’s colour from a warm evening colour to a cold night colour.

kdenlive_keyframes

Keyframes for effects

After clicking the keyframe icon (the clock icon framed in the previous image), the Properties widget will re-arrange. By default there will be two keyframes, one at the beginning of the timeline clip and one at the end. Move the timeline cursor to the end of the timeline clip, such that the project monitor actually shows the new colours when changing the parameters of the keyframe at the end.

Make sure the last keyframe is selected in the Properties list. Then you are ready to flood the piano with a deep blue.

Moving the timeline cursor to the beginning of the project and playing it (with Space, or the Play button in the Project Monitor), the piano should now change the colour as desired.

Keyframing was the hardest part of this tutorial. If you managed to do it, you will master Kdenlive easily!

Note

In this Quick Start section we brushed over the effects very quickly. More details about effects and an explanation of each effect is available in the Effects and Filters section of this documentation.

Music

kdenlive_fadeout

Audio fadeout

Since the clips do not provide any audio let’s search for some nice piece of music from your local collection or on web pages like Jamendo. After adding the audio clip to the Project Bin it should be dragged to an audio track on the timeline.

The audio clip can be resized on the timeline the same way as video clips can. The cursor will snap in at the end of the project automatically. To add a fade out effect at the end of the audio clip (except if you found a file with exactly the right length) you can hover over the top right (or left) edge of the timeline clip and drag the red shaded triangle to the position where fading out should start. [7]

Rendering

kdenlive_renderer

Rendering dialog

A few minutes left, and the project is finished! Click the Render button (or go to Project ‣ Render, or press Ctrl+Enter) to get the dialog shown on the left. Select the desired output file for our new video with all effects and transitions, choose MP4 (works nearly everywhere), select the output file location and press the Render to File button.

kdenlive_rendering

Rendering progress

After some seconds rendering will be finished and your first Kdenlive project is completed. Congratulations!

References and notes